png1-paddle-dryer

Conductive drying, also known as contact drying, is very suitable for wet particles, while conductive dryers are more thermally efficient. Evaporated water vapor or organic solvent is withdrawn by vacuum or with a small amount of gas stream, which is the main carrier of moisture, and vacuum operation is recommended for heat sensitive granular materials. […]

png1-paddle-dryer

Hollow paddle dryer is a horizontal agitating dryer based on heat conduction. Because the inner hollow agitating blade is shaped like a paddle, it is called a Hollow paddle dryer. The paddle dryer has been developed abroad for many years. This type of machine has developed two-axis and four-axis structures and multiple specifications in foreign […]

Hollow paddle dryer

What is a combined drying equipment? Due to the different nature of various materials, drying materials in a single form of drying equipment often does not achieve the purpose of drying. If two or more drying equipments are used, they are joined together, or special equipment is added to the machine to make new In […]

Slime drying equipment

Drying equipment and drying equipment are the equipment we often mention, but the difference between drying equipment and drying equipment seems to be unclear. When we want to dehydrate a product, we will think of drying equipment or drying equipment. We will look for information about drying equipment and drying equipment. Because of the special […]

Gypsum sludge drying

Both the agitator shaft of the paddle dryer and the blades welded to the shaft are hollow structures. The shape of the blade is a wedge-shaped hollow semi-circular shape, which can be passed into the heat transfer medium. In addition to stirring, it is also the heat transfer surface of the device. The blade is […]

Liquid drying equipment

Project project: The introduction of steam from the steam tube and the discharge of condensed water directly affect the efficiency of the dryer. The traditional steam tube rotary dryer or steam calciner has a steam drum at one end and the steam heat exchange tubes in the dryer are connected. The steam drum is steam-distributed […]

Feed drying equipment

First, preparation stage: Check the venting valve and butterfly valve at the bottom of the drying box, the upper water valve of the condenser, the intermediate overflow valve, the bottom drain valve, the hot air blower butterfly valve and the vacuum line venting valve, all should be in the closed position. Check if the oil […]

s-rotary-sludge-dryer

The steam calciner in the drying equipment is a type of drum type reaction equipment for indirect heating of steam in the production of soda ash to decompose the material. The second furnace body consists of a furnace body, an alkali, an alkali, a heating and a transmission device. The second furnace body is a […]

dry-material-form

The method of dryer selection involves the use of past experience. The initial method of selecting the dryer is based on the nature of the material. The equipment selected for handling the liquid material is usually limited to spray drying equipment, drum drying equipment and stirred intermittent vacuum drying. device. It is also suitable for […]